Euralco Americas specializes in the more difficult to obtain aluminium semis:

  • Overwide sheet and plate 1.500-2.500mm (60-100").
  • Heat treated sheet and plate in the alloy-range: EN-AW 2000, 6000 and 7000.
  • Large blocks up to 1.250mm (49") thick in EN-AW 5000 and 7000 alloys.
  • Extruded and drawn customized profiles.
  • Extruded and drawn hard alloy tubes, bars and rods in EN-AW 2000 and 7000 alloys.

Alloys:

Depending on the chosen alloy and material state, mechanical values can be achieved with a tensile strength of 70 Mpa for soft 1050 alloy as used in cooking pans or up to 590 Mpa for 7010 alloy as used in aircraft parts.

Euralco Americas has a clear strategic focus on the following alloys;

Extruded products:

2007, 2011, 2011A, 2014, 2014A, 2017, 2017A, 2024, 2030, 6005A, 6012, 6061, 6262, 6082, 7003, 7004, 7005, 7020, 7022, 7075, 7108, 7175.

Temper:
0, F, H111, T3, T351, T3510, T3511, T4, T451, T4510, T4511, T5, T6, T651, T6510, T6511, T66, T7, T7351, T73510, T73511, T8, T832, T851, T9.

Rolled products:

2014, 2017A, 2024, 5083, 6061, 6082, 7020, 7021, 7022, 7050, 7075, 7475.

Temper:
T0, T3, T351, T4, T451, T6, T62, T651, T7, T73, T7351, T76, T7651, H111, H321, H116.